CYUSB3314 datasheet(4/43 Pages) CYPRESS

4 / 43 page

CYUSB330x/CYUSB331x

CYUSB332x/CYUSB230x

Document Number: 001-73643 Rev. *R

Page 4 of 43

Architecture Overview

The Block Diagram on page 2 shows the HX3 architecture. HX3

consists of two independent hub controllers (SS and USB 2.0),

the Cortex-M0 CPU subsystem, an I2C interface, and port

controller blocks.

SS Hub Controller

This block supports the SS hub functionality based on the

USB 3.0 specification. The SS hub controller supports the

following:

■ SS link power management (U0, U1, U2, U3 states)

■ Full-duplex data transmission

USB 2.0 Hub Controller

This block supports the LS, FS, and HS hub functionalities. It

includes the repeater, frame timer, and four transaction trans-

lators.

The USB 2.0 hub controller block supports the following:

■ USB 2.0 link power management (L0, L1, L2, L3 states)

■ Suspend, resume, and remote wake-up signaling

■ Multi-TT (one TT for each DS port)

CPU

The ARM Cortex-M0 CPU subsystem is used for the following

functions:

■ System configuration and initialization

■ Battery charging control

■ Vendor-specific commands for the USB-to-I2C bridge

■ String-descriptor support

■ Suspend status indicator

■ Shared Link support in embedded systems

I2C Interface

The I2C interface in HX3 supports the following:

■ I2C Slave, Master, and Multi-master configurations

❐ Configure HX3 by an external I2C master in I2C slave mode

❐ Configure HX3 from an I2C EEPROM

❐ Multi-master mode to share EEPROM with other I2C masters

■ In-System Programming of the I2C EEPROM from HX3’s

US port

Port Controller

The port controller block controls DS port power to comply with

the BC v1.2 and USB 3.0 specifications. This block also controls

the US port power in the ACA-Dock mode. Control signals for

external power switches are implemented within the chip. HX3

controls the external power switches at power-on to reduce

in-rush current.

The port controller block supports the following:

■ Overcurrent detection

■ SS and USB 2.0 port indicators for each DS port

■ Ganged and individual power control modes

■ Automatic port numbering based on active ports

Applications

■ Standalone hubs

■ PC and tablet motherboards

■ Docking station

■ Hand-held cradles

■ Monitors

■ Digital TVs

■ Set-top boxes

■ Printers

CYUSB3314 bảng dữ liệu(PDF) 4 Page - Cypress Semiconductor

CYUSB3314 bảng dữ liệu(HTML) 4 Page - Cypress Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

bảng dữ liệu tải về

Link URL