REV. A

–4–

ADN2811

ABSOLUTE MAXIMUM RATINGS

*

Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V

Minimum Input Voltage (All Inputs) . . . . . . . . . . VEE – 0.4 V

Maximum Input Voltage (All Inputs) . . . . . . . . VCC + 0.4 V

Maximum Junction Temperature . . . . . . . . . . . . . . . . . 165 C

Storage Temperature . . . . . . . . . . . . . . . . . . –65 C to +150 C

Lead Temperature (Soldering 10 Sec) . . . . . . . . . . . . . . 300 C

*Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

THERMAL CHARACTERISTICS

Thermal Resistance

48-Lead LFCSP, four-layer board with exposed paddle

soldered to VCC

θ

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

ADN2811 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended

to avoid performance degradation or loss of functionality.

ORDERING GUIDE

Model

Temperature Range

Package

Option

ADN2811ACP-CML

–40ºC to +85ºC

48-Lead LFCSP

CP-48

ADN2811ACP-CML-RL –40ºC to +85ºC

48-Lead LFCSP

CP-48

Tape-Reel, 2500 pcs