Features
■ e200z4d, 32-bit Power Architecture® – up to 120 MHz and 200 MIPs operation
■ e200z0h, 32-bit Power Architecture – up to 80 MHz and 75 MIPs operation
■ Memory – Up to 3 MByte on-chip Flash with ECC – Up to 256 KByte on-chip SRAM with ECC – 64KByte on-chip Data Flash with ECC – 16-entry memory protection unit (MPU) – User selectable Memory BIST
■ Interrupts – 255 interrupt sources with 16 priority levels – Up to 54 ext. IRQ including 30 wake-up
■ GPIOs: from 147 (QFP176) to 199 (BGA256)
■ System timer units – 8-ch. 32-bit periodic interrupt timer (PIT) – 4-channel 32-bit system timer (STM) – Safety System Watchdog Timer (SWT) – Real-time clock timer (RTC/API)
■ eMIOS, 16-bit counter timed I/O units – Up to 64 channels with PWM/MC/IC/OC
■ Two ADC (10-bit and 12-bit) – Up to 62 channels extendable to 90 ch. – Multiple Analog Watchdog
■ Dedicated diagnostic features for lighting – Advanced shiffted PWM generation – ADC conversion synchronized on PWM
■ Communication interfaces – Up to 6 FlexCAN with 64 buffers each – Up to 10 LINFlex/UART channels – Up to 8 buffered DSPI channels – I2C interface – One FleyRay (dual-ch.) with 128 buffers – Fast Ethernet Controller
■ Cryptographic Services Engine (CSE) – AES-128 en/decryption, CMAC auth. – Secured device boot mode
■ 32-ch. eDMA with multiple request sources
■ Clock generation – 4 to 40 MHz main oscillator – 16 MHz internal RC oscillator – Software-controlled FMPLL – 128 kHz internal RC oscillator – 32 kHz auxiliary oscillator – Clock Monitoring Unit (CMU)
■ Low power capabilities – Ultra low power STANDBY – CAN Sampler to store CAN ID in STBY – Fast wake-up and exectute from RAM
■ Exhaustive debugging capability – Nexus 3+ interface on LBGA256 only – Nexus 1 on all devices
■ Voltage supply – Single 5 V or 3.3 V supply – On-chip Vreg with external ballast transitor
■ Operating temperature range -40 to 125 °C