Features
■ AEC-Q100 qualified
■ 32-bit Power Architecture VLE compliant CPU cores: – Three main CPUs, dual issue, 32-bit CPU core complexes (e200z4), two of them having one checker core in lock-step – Floating Point, End-to-End Error Correction
■ 6576 KB (6288 KB code flash + 288 KB data flash) on-chip flash memory: – supports read during program and erase operations, and multiple blocks allowing EEPROM emulation – Supports read while read between the two code Flash partitions.
■ 608 KB on-chip general-purpose SRAM (in addition to 160 KB core local data RAM)
■ 96-channel direct memory access controller (eDMA)
■ Comprehensive new generation ASIL-D safety concept: – ASIL-D of ISO 26262 – FCCU for collection and reaction to failure notifications – Memory Error Management Unit (MEMU) for collection and reporting of error events in memories – Cyclic redundancy check (CRC) unit
■ Dual-channel FlexRay controller
■ Hardware Security Module (HSM)
■ Junction temperature range -40 °C to 165 °C
■ GTM 343 - Generic Timer Module: – Intelligent complex timer module – 144 channels (40 input and 104 output) – 5 programmable fine grain multi-threaded cores – 24-bit wide channels
■ Enhanced analog-to-digital converter system with: – 1 supervisor 12-bit SAR analog converter – 4 separate fast 12-bit SAR analog converters – 3 separate 10-bit SAR analog converters, one with STDBY mode support – 6 separate 16-bit Sigma-Delta analog converters
■ Communication interfaces: – 18 LINFlexD modules – 10 deserial serial peripheral interface (DSPI) modules – 8 MCAN interfaces with advanced shared memory scheme and ISO CAN-FD support, one supporting time-triggered controller area network (TTCAN)
■ Two Ethernet controller 10/100 Mbps, compliant IEEE 802.3-2008
■ Flexible Power Supply options: – External Regulators (1.2 V core, 3.3 V–5 V IO) – Single internal SMPS regulator (eLQFP176) – Single internal Linear Regulator with external ballast (FPBGA292)
■ Nexus development interface (NDI) per IEEE- ISTO 5001-2003 standard, with some support for 2010 standard
■ Boot assist Flash (BAF) supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART FPBGA292 (17 x 17 x 1.8 mm) eLQFP176 (24 x 24 x 1.4 mm) Known Good Die