1FEATURES
• Up to 20-V Bus Operation hot•
Integrated 30-mΩ Pass MOSFET
• Programmable Current Limit from:
0.83 A to 6.5 A
• Programmable Inrush Current Slew Rate
• Thermal Shutdown and fault alert
• 4-mm x 4-mm QFN16
• –40°C to 125°C Junction Temperature Range
• UL2367 Recognized - File Number E169910
• CB Certified

APPLICATIONS
• Solid State Drive (SSD)
• Hard Disk Drive (HDD)
• RAID Arrays
• Telecommunications
• Plug-In Circuit Boards
• Notebooks and Netbooks
• PCIE
• Fan Control

DESCRIPTION
The TPS25910 device provides highly integrated hot•
swap power management and superior protection in applications up to 20 V. The maximum UV turn-on
threshold of 2.9 V makes the TPS25910 device well
suited to standard bus voltages as low as 3.3 V. This
device is intended for systems where a voltage bus
must be protected from undesired permanent and transient overload.
At start-up or when hot plugging into the system bus,
the TPS25910 device limits the inrush current by
controlling the ramp rate of the output voltage, VOUT.
The slew rate of VOUT can be adjusted with a
capacitor between the GATE pin and the GND pin.
Built in SOA protection ensures that the internal
MOSFET operates inside a safe operating area (SOA) under the harshest operating conditions. In
addition, the current-limit threshold, which is
independent of the power limit, can be adjusted with
a resistor between the ILIM pin and the GND pin.
The TPS25910 device provides a fault indicator
output when in thermal fault.
The TPS25910 device is available in a 16-pin QFN
package.