Description
The TSS Series is a totally solid-state timing module. Its 1A
rated, solid-state output provides an excellent method of
time control for exposures, dispensing, or for increasing or
decreasing a switch closure. Time delays from 0.05 to 600
seconds, in 4 ranges, cover 90% of all OEM applications.
Factory calibration of fixed delays is ±5% and the repeat
accuracy is ±2%. The TSS Series can be surface mounted with
a single screw, or snapped on a 35mm DIN rail using the
P1023-20 accessory adaptor.
Operation (Single Shot)
Voltage must be applied before and during timing. Upon
momentary or maintained closure of the initiate switch, the
output energizes for a measured interval of time. At the end
of the delay, the output de-energizes. Opening or reclosing the
initiate switch during timing has no affect on the time delay. The
output will energize if the initiate switch is closed when input
voltage is applied.
Reset: Reset occurs when the time delay is complete and the
initiate switch opens. Loss of input voltage resets the time delay
and output.

FEATURES BENEFITS
Analog circuitry Repeat accuracy + / - 2%,
Factory calibration + / - 5%
Compact, low
cost design Allows flexiblility for OEM applications
Totally solid state
and encapsulated
No moving parts to arc and wear out over time and
encapsulated to protect against shock, vibration,
and humidity
Surface or DIN
rail mounting Provides flexibility for installation