Description
The TSDS Series is designed for more demanding commercial
and industrial applications where small size and accurate
performance are required. The factory calibration for fixed
time delays is within 1% of the target time delay. The repeat
accuracy, under stable conditions, is 0.5% of the time delay. The
TSDS Series is rated to operate over an extended temperature
range. Time delays of 0.1 seconds to 1000 minutes are available.
The output is rated 1A steady and 10A inrush. The modules are
totally solid state and encapsulated to protect the electronic
circuitry. This product is suitable for many applications, including
dispensing, welding, and exposure timing.
Operation (Single Shot)
Input voltage must be applied before and during timing. Upon
momentary or maintained closure of the initiate switch, the
output energizes for a measured interval of time. At the end
of the delay, the output de-energizes. Opening or reclosing the
initiate switch during timing has no affect on the time delay.
The output will not energize if the initiate switch is closed when
input voltage is applied.
Reset: Reset occurs when the time delay is complete and the
initiate switch is opened. Loss of input voltage resets the time
delay and output.

FEATURES BENEFITS
Compact, low cost
design measuring 2 in.
(50.8mm) square
Allows flexiblility for OEM applications
Microcontroller based Repeat Accuracy + / - 0.5%,
Factory calibration + / - 1%
1A Steady, 10A inrush
solid-state output Provides 100 million operations in typical conditions.
Totally solid state
and encapsulated
No moving parts to arc and wear out over time and
encapsulated to protect against shock, vibration,
and humidity
Wide temperature
range: -40° to 75°C
Reliable in demanding commercial and
industrial applications