OVSA1ABLCR8 datasheet(3/5 Pages) TTELEC

3 / 5 page

Issue B

11/2016

Page 3

TT Electronics | Optek Technology, Inc.

1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200

www.ttelectronics.com | sensors@ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

OVSA1xBLCR8 Series

Standard Bins

LEDs are sorted to luminous intensity (IV) and dominant wavelength (nm) bins listed below. Each reel consists of a single

intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek

will not accept orders for single intensity bins or single color bins.

RED: OVSA1SBLCR8

IV Code

Min (mcd)

Max (mcd)

2240

2800

3550

4500

5600

AMBER: OVSA1ABLCR8

IV Code

Min (mcd)

Max (mcd)

3550

4500

5600

7100

9000

Luminous Intensity (IV ) @ 50mA

RED: OVSA1SBLCR8

nm Code

Min

Max

618

630

AMBER: OVSA1ABLCR8

nm Code

Min

Max

584

587

590

593

596

599

Dominant Wavelength (nm)

Solder = Lead-Free

Average ramp-up rate = 4°C / sec. max

Peak temperature = 250°C max.

Preheat temperature: 150 - 220°C

Time within 5°C of actual peak temperature

= 10 sec. max

Preheat time: 120 sec. max.

Ramp-down rate = 6°C / sec. max.

Duration above 217°C is 60 sec. max

Reflow Solder Profile

OVSA1ABLCR8 bảng dữ liệu(PDF) 3 Page - TT Electronics.

OVSA1ABLCR8 bảng dữ liệu(HTML) 3 Page - TT Electronics.

Html Pages

1 2 3 4 5

bảng dữ liệu tải về

Link URL