NOTE: Specifications subject to change without notice. Please check our website for latest information.

Proprietary and Confidential

Document of Superworld

28/12/2016

P4

8. Soldering

Mildly activated rosin fluxes are preferred. The terminations are suitable for re-flow soldering systems. If hand

soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.

Note:

If wave soldering is used, there will be some risk.

Re-flow soldering temperatures below 240°C, there will be non-wetting risk

8-1.1 Solder Re-flow:

Recommended temperature profiles for lead free re-flow soldering in Figure 1.

Z4K601‐RL‐10 

Z4K501‐RN‐10 

Z4K471‐RJ‐10