TPPM0111DWPR datasheet(3/10 Pages) TI

3 / 10 page

TPPM0111

DUAL LOW-DROPOUT LINEAR REGULATOR

SLVS414 – DECEMBER 2001

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

Terminal Functions

TERMINAL

I/O

DESCRIPTION

NAME

NO.

I/O

DESCRIPTION

1–3,

5, 7,

9–12

13–17†

18,9

No connection

3.3VOUT

3.3-V regulated output

5VCC

5-V input

1.5VOUT

1.5-V regulated output

GND

Ground

† These terminals are to be used for test purposes only, and are not connected in system applications. No signal traces should be connected to

these terminals.

Table 1. Input Selection‡

INPUT CONDITION

3.3VOUT CONDITION

1.5VOUT CONDITION

V(3.3VOUT)

I(3.3VOUT)

V(1.5VOUT)

I(1.5VOUT)

Power up 0 V to 5 V

Within 2 V of 1.5VOUT

0 to overcurrent limit

0 V to 1.5 V

0 to overcurrent limit

5 V

3.3 V

±3%

0 A to 1.5 A

1.5 V

±2%

0 mA to 300 mA

Power down 5 V to 0 V

Within 2 V of 1.5VOUT

1.5 A to 0 A

1.5 V to 0 V

300 mA to 0 mA

5 V

0 V

Up to 5.4 A

1.5 V

0 mA to 300 mA

5 V

Less than 2 V

Don’t care

0 V

Up to 1.08 A

0 V

Within 2 V of 1.5VOUT

Don’t care

1.5 V to 0 V

Don’t care

‡ See Figures 2, 3, and 4.

absolute maximum ratings over operating free-air temperature (unless otherwise noted)§

5-V input, V(5VCC) (see Notes 1 and 2)

7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3-V output current limit, IL(3.3VOUT)

5.4 A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5-V output current limit, IL(1.5VOUT)

1.08 A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous power dissipation, PD (see Note 3)

4 W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrostatic discharge susceptibility, V(HBMESD)

2 kV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating ambient temperature range, TA

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

– 55

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature (soldering, 10 sec), T(LEAD)

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

§ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values are with respect to GND.

2. Absolute negative voltage values on these terminals should not be below –0.5 V.

3. Assumed correct thermal management technique implementation and ambient temperature of 25

°C.

recommended operating conditions

MIN

TYP

MAX

UNIT

5-V input, V(5VCC)

4.7

5.3

Load capacitance, CL

10 m

Ω < ESR(CL) < 1 Ω

100

µF

Output load current I

3.3VOUT

1.5

Output load current, IO

1.5VOUT

300

Ambient temperature, TA

°C

TPPM0111DWPR bảng dữ liệu(PDF) 3 Page - Texas Instruments

TPPM0111DWPR bảng dữ liệu(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10

bảng dữ liệu tải về

Link URL