| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MFC2000 bảng dữ liệu(PDF) 147 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
MFC2000 bảng dữ liệu(HTML) 147 Page - List of Unclassifed Manufacturers |
|
147 / 426 page ![]() Hardware Description MFC 2000 Multifunctional Peripheral Controller 2000 100723A Conexant 6-5 6.5 Fax Timing Registers Address: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Default: 125 uS Prescaler (125usPrescaler) 01FF8881 (Not Used) Rst Value xxh Read Value 00h Address: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Default: 125 uS Prescaler (125usPrescaler) 01FF8880 n (8 bits) as applied in the equation: (n+1)*(ICLK period *8) Rst Value 00h Read Value 00h Address: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Default: ICLK(AUXCLK) Period (ICLKPeriod) 01FF8883 (Not Used) (Not Used) (Not Used) (Not Used) (Not Used) (Not Used) (Not Used) (Not Used) Rst Value xxh Read Value 00h Address: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Default: ICLK(AUXCLK) Period (ICLKPeriod) 01FF8882 (Not Used) (Not Used) (Not Used) (Not Used) (Not Used) IHSCLK Period ICLK (AUXCLK) Period ICLK= SIUCLK/(ICLKPeriod + 1) Rst Value xxxxx111b Read Value 07h IHSCLK = MCLK/(IHSCLKPeriod + 1) Address: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Default: Mechanical Subsystem (MS) Period (MSINTPeriod) 01FF8885 (Not Used) (Not Used) (Not Used) Rst Value xxh Read Value 00h Address: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Default: Mechanical Subsystem (MS) Period (MSINTPeriod) 01FF8884 2MSIRQ Select 0=1MSIRQ 1=2MSIRQ (Not Used) n (6 bits) as applied in the equation: (n+1)*125 uS Prescaler period) Rst Value 0x000000b Read Value 0x000000b On Reset, the 125usPrescaler, 1-ms Timer, and MSINT counters are disabled. Writing to the MSINTPeriod register enables these timers and counters. In addition, the 125usPrescaler must be set to the appropriate value in order for the WatchDog and timing chains to operate correctly. If a new value is written into the MSINTPeriod register while the MSINT counter is running, the new value is not loaded into the counter until it counts down to 0. 1MS/2MSIRQ is a programmable interrupt source. If the ‘2MSIRQ Select’ bit (bit7) of the MSINTPeriod register is set to 0, the interrupt is generated every 1ms (1.00708ms). If the ‘2MSIRQ Select’ bit (bit7) of the MSINTPeriod register is set to 1, the interrupt is generated every 2ms (2.01416ms). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |