LM5010 datasheet(3/19 Pages) NSC

3 / 19 page

Pin Description

PIN NUMBER

NAME

DESCRIPTION

APPLICATION INFORMATION

LLP-10

TSSOP-14

Switching Node

Internally connected to the buck switch source.

Connect to the inductor, free-wheeling diode, and

bootstrap capacitor.

BST

Boost pin for bootstrap capacitor

Connect a 0.022 µF capacitor from SW to this pin.

The capacitor is charged from V

CC via an internal

diode during each off-time.

SEN

Current sense

The re-circulating current flows through the internal

sense resistor, and out of this pin to the

free-wheeling diode. Current limit is nominally set at

1.25A.

GND

Sense Ground

Re-circulating current flows into this pin to the

current sense resistor.

RTN

Circuit Ground

Ground for all internal circuitry other than the current

limit detection.

Feedback input from the

regulated output

Internally connected to the regulation and

over-voltage comparators. The regulation level is

2.5V.

Softstart

An internal 11.5 µA current source charges an

external capacitor to 2.5V, providing the softstart

function.

811

ON/SD

On-time control and shutdown

An external resistor from V

IN to this pin sets the

buck switch on-time. Grounding this pin shuts down

the regulator.

912

Output from the startup regulator

Nominally regulates at 7.0V. An external voltage

(7.5V-14V) can be applied to this pin to reduce

internal dissipation. An internal diode connects V

to V

IN.

Input supply voltage

Nominal input range is 8.0V to 75V.

1,7,8,14

No connection.

No internal connection.

LM5010 bảng dữ liệu(PDF) 3 Page - National Semiconductor (TI)

LM5010 bảng dữ liệu(HTML) 3 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

bảng dữ liệu tải về

Link URL