SPE-15-8-004/C/JC

Page 5 of 8

4. Installation

Disclaimer: Installation of this device requires knowledge of basic electrical

and experience with installing electronic devices. We recommend seeking a

professional installer if you are not accustomed to installing electronics or

high tech devices. Installation of this device is at your own risk. Taoglas

assumes no responsibility for the installation or improper operation of this

device.

4.1 Required Items

1.

AC/DC power adapter, +8V to +36V output voltage, >6 Watts

2.

Cellular Antenna

3.

Coaxial cable with SMA(M) connector and proper connector required for

connecting to cellular device.

4.

Your cellular device

4.2 Instructions

1.

Connect Antenna to SMA connector labeled "Antenna".

2.

Connect coaxial cable to SMA connector labeled "Device".

3.

Connect other end of coaxial cable to your cellular device.

4.

Power your device and observe the LED indicators.