G8SN

G8SN

Application Examples

Dimensions

RATED VOLTAGE

22.5 MAX.

MARK

TYPE

LOT NO.

16.5 MAX.

16.5 MAX.

0.5

3.5

2.1

2

12.2

5.3

1.8

1.8

12

Ø1.6

4–Ø1.3

(All dimensions in mm)

Omron PCB relays may be mounted in any

convenient location that is dry and not exposed to

All Omron PCB relays may be oriented in any

desired direction. Whenever possible, however,

care should be taken that they are not subjected

to vibration along the direction of contact

movement.

If several relays are to be mounted on a single

printed circuit board, they should be given at least

3mm clearance on all sides as shown in the

diagram below.

3mm min.

3mm min.

Note:

Proper spacing is necessary to dissipate heat build–up

from individual relays. Other than this, there are normally

no restrictions depending on application. Please contact

Omron for details.

OMRON Electronics Ltd.

1, Apsley Way,

Staples Corner,

London NW2 7HF

Phone: (0181) 450 4646 Fax: (0181) 450 8087

Cat. No. C–G8SN–001

LEADERS IN ELECTRONIC COMPONENTS

In the interest of product improvement, specifications are subject to change without notice.