M0519LE3AE datasheet(31/69 Pages) ETC2

31 / 69 page

M0519

Nov. 02, 2016

Page 31 of 69

Rev 1.02

6.2.6

Nested Vectored Interrupt Controller (NVIC)

The Cortex

® -M0 provides an interrupt controller as an integral part of the exception mode, named

as “Nested Vectored Interrupt Controller (NVIC)”, which is closely coupled to the processor core

and provides following features:



Nested and Vectored interrupt support



Automatic processor state saving and restoration



Reduced and deterministic interrupt latency

The NVIC prioritizes and handles all supported exceptions. All exceptions are handled in “Handler

Mode”. This NVIC architecture supports 32 (IRQ[31:0]) discrete interrupts with 4 levels of priority.

All of the interrupts and most of the system exceptions can be configured to different priority

levels. When an interrupt occurs, the NVIC will compare the priority of the new interrupt to the

current running one’s priority. If the priority of the new interrupt is higher than the current one, the

new interrupt handler will override the current handler.

When an interrupt is accepted, the starting address of the interrupt service routine (ISR) is fetched

from a vector table in memory. There is no need to determine which interrupt is accepted and

branch to the starting address of the correlated ISR by software. While the starting address is

fetched, NVIC will also automatically save processor state including the registers “PC, PSR, LR,

R0~R3, R12” to the stack. At the end of the ISR, the NVIC will restore the mentioned registers

from stack and resume the normal execution. Thus it will take less and deterministic time to

process the interrupt request.

The NVIC supports “Tail Chaining” which handles back-to-back interrupts efficiently without the

overhead of states saving and restoration and therefore reduces delay time in switching to

pending ISR at the end of current ISR. The NVIC also supports “Late Arrival” which improves the

efficiency of concurrent ISRs. When a higher priority interrupt request occurs before the current

ISR starts to execute (at the stage of state saving and starting address fetching), the NVIC will

give priority to the higher one without delay penalty. Thus it advances the real-time capability.

For more detailed information, please refer to the “ARM

Cortex

® -M0 Technical Reference

Manual” and “ARM

® v6-M Architecture Reference Manual”.

M0519LE3AE bảng dữ liệu(PDF) 31 Page - List of Unclassifed Manufacturers