| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32L471VG bảng dữ liệu(PDF) 94 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L471VG bảng dữ liệu(HTML) 94 Page - STMicroelectronics |
|
94 / 218 page ![]() Electrical characteristics STM32L471xx 94/218 DocID027226 Rev 1 Table 20. Current characteristics Symbol Ratings Max Unit ∑IVDD Total current into sum of all VDD power lines (source)(1) 150 mA ∑IVSS Total current out of sum of all VSS ground lines (sink)(1) 150 IVDD(PIN) Maximum current into each VDD power pin (source)(1) 100 IVSS(PIN) Maximum current out of each VSS ground pin (sink)(1) 100 IIO(PIN) Output current sunk by any I/O and control pin except FT_f 20 Output current sunk by any FT_f pin 20 Output current sourced by any I/O and control pin 20 ∑IIO(PIN) Total output current sunk by sum of all I/Os and control pins(2) 100 Total output current sourced by sum of all I/Os and control pins(2) 100 IINJ(PIN)(3) Injected current on FT_xxx, TT_xx, RST and B pins, except PA4, PA5 -5/+0(4) Injected current on PA4, PA5 -5/0 ∑|IINJ(PIN)| Total injected current (sum of all I/Os and control pins)(5) 25 1. All main power (VDD, VDDA, VDDIO2, VBAT) and ground (VSS, VSSA) pins must always be connected to the external power supplies, in the permitted range. 2. This current consumption must be correctly distributed over all I/Os and control pins. The total output current must not be sunk/sourced between two consecutive power supply pins referring to high pin count QFP packages. 3. Positive injection (when VIN > VDDIOx) is not possible on these I/Os and does not occur for input voltages lower than the specified maximum value. 4. A negative injection is induced by VIN < VSS. IINJ(PIN) must never be exceeded. Refer also to Table 19: Voltage characteristics for the minimum allowed input voltage values. 5. When several inputs are submitted to a current injection, the maximum ∑|IINJ(PIN)| is the absolute sum of the negative injected currents (instantaneous values). Table 21. Thermal characteristics Symbol Ratings Value Unit TSTG Storage temperature range –65 to +150 °C TJ Maximum junction temperature 150 °C |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |