| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32F302XD bảng dữ liệu(PDF) 137 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F302XD bảng dữ liệu(HTML) 137 Page - STMicroelectronics |
|
137 / 168 page ![]() DocID026900 Rev 4 137/168 STM32F302xD STM32F302xE Electrical characteristics 146 EL Integral linearity error ADC clock freq. ≤ 72 MHz, Sampling freq ≤ 5 Msps, 2.0 V ≤ VDDA ≤ 3.6 V 64-pin package Single ended Fast channel 5.1 Ms - ±3 LSB Slow channel 4.8 Ms - ±3.5 Differential Fast channel 5.1 Ms - ±2 Slow channel 4.8 Ms - ±2.5 ENOB (5) Effective number of bits Single ended Fast channel 5.1 Ms 10.4 - bits Slow channel 4.8 Ms 10.4 - Differential Fast channel 5.1 Ms 10.8 - Slow channel 4.8 Ms 10.8 - SINAD (5) Signal-to- noise and distortion ratio Single ended Fast channel 5.1 Ms 64 - dB Slow channel 4.8 Ms 63 - Differential Fast channel 5.1 Ms 67 - Slow channel 4.8 Ms 67 - SNR(5) Signal-to- noise ratio Single ended Fast channel 5.1 Ms 64 - dB Slow channel 4.8 Ms 64 - Differential Fast channel 5.1 Ms 67 - Slow channel 4.8 Ms 67 - THD(5) Total harmonic distortion Single ended Fast channel 5.1 Ms - -75 Slow channel 4.8 Ms - -75 Differential Fast channel 5.1 Ms - -79 Slow channel 4.8 Ms - -78 1. ADC DC accuracy values are measured after internal calibration. 2. ADC accuracy vs. negative Injection Current: Injecting negative current on any analog input pins should be avoided as this significantly reduces the accuracy of the conversion being performed on another analog input. It is recommended to add a Schottky diode (pin to ground) to analog pins which may potentially inject negative current. Any positive injection current within the limits specified for IINJ(PIN) and ΣIINJ(PIN) in Section 6.3.15 does not affect the ADC accuracy. 3. Better performance may be achieved in restricted VDDA, frequency and temperature ranges. 4. Data based on characterization results, not tested in production. 5. Value measured with a -0.5 dB full scale 50 kHz sine wave input signal. Table 84. ADC accuracy, 64-pin packages(1)(2)(3) (continued) Symbol Parameter Conditions Min(4) Max (4) Unit |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |