STM8L151X8 datasheet(69/146 Pages) STMICROELECTRONICS

69 / 146 page

DocID17943 Rev 10

69/146

STM8L151x6/8 STM8L152x6/8

Electrical parameters

123

Table 16. Current characteristics

Symbol

Ratings

Max.

Unit

IVDD

Total current into VDD power line (source)

IVSS

Total current out of VSS ground line (sink)

IIO

Output current sunk by IR_TIM pin

(with high sink LED driver capability)

Output current sunk by any other I/O and control pin

Output current sourced by any I/Os and control pin

- 25

IINJ(PIN)

Injected current on true open-drain pins (PC0 and PC1)(1)

- 5 / +0

Injected current on five-volt tolerant (FT) pins(1)

1. Positive injection is not possible on these I/Os. A negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 15. for maximum allowed input voltage values.

- 5 / +0

Injected current on any other pin (2)

A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 15. for maximum allowed input voltage values.

- 5 / +5

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins) (3)

3. When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values).

± 25

Table 17. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to +150

° C

Maximum junction temperature

150

STM8L151x8 bảng dữ liệu(PDF) 69 Page - STMicroelectronics

STM8L151x8 bảng dữ liệu(HTML) 69 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL