| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SPC560B64x bảng dữ liệu(PDF) 86 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPC560B64x bảng dữ liệu(HTML) 86 Page - STMicroelectronics |
|
86 / 133 page ![]() Electrical characteristics SPC560B54x/6x 86/133 DocID15131 Rev 9 4.10.3 Start-up/Switch-off timings 4.11 Electromagnetic compatibility (EMC) characteristics Susceptibility tests are performed on a sample basis during product characterization. 4.11.1 Designing hardened software to avoid noise problems EMC characterization and optimization are performed at component level with a typical application environment and simplified MCU software. It should be noted that good EMC performance is highly dependent on the user application and the software in particular. Table 32. Flash power supply DC electrical characteristics Symbol Parameter Conditions(1) Value Unit Min Typ Max ICFREAD CC Sum of the current consumption on VDD_HV and VDD_BV on read access Flash module read fCPU = 64 MHz Code Flash — — 33 mA IDFREAD Data Flash — — 33 ICFMOD CC Sum of the current consumption on VDD_HV and VDD_BV on matrix modification (program/erase) Program/Erase on-going while reading Flash registers fCPU = 64 MHz Code Flash — — 52 mA IDFMOD Data Flash — — 33 ICFLPW CC Sum of the current consumption on VDD_HV and VDD_BV during Flash low power mode — Code Flash — — 1.1 mA IDFLPW Data Flash — — 900 µA ICFPWD CC Sum of the current consumption on VDD_HV and VDD_BV during Flash power down mode — Code Flash — — 150 µA IDFPWD Data Flash — — 150 1. VDD = 3.3 V ± 10% / 5.0 V ± 10%, TA = –40 to 125 °C, unless otherwise specified. Table 33. Start-up time/Switch-off time Symbol C Parameter Conditions(1) Value Unit Min Typ Max tFLARSTEXIT CC T Delay for Flash module to exit reset mode — — — 125 µs tFLALPEXIT CC T Delay for Flash module to exit low-power mode — — — 0.5 tFLAPDEXIT CC T Delay for Flash module to exit power-down mode — — — 30 tFLALPENTRY CC T Delay for Flash module to enter low-power mode — — — 0.5 tFLAPDENTRY CC T Delay for Flash module to enter power-down mode — — — 1.5 1. VDD = 3.3 V ± 10% / 5.0 V ± 10%, TA = 40 to 125 °C, unless otherwise specified. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |