| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
KMH bảng dữ liệu(PDF) 2 Page - United Chemi-Con, Inc. |
|
|
|||||||||||||||||||||||||||||
KMH bảng dữ liệu(HTML) 2 Page - United Chemi-Con, Inc. |
|
2 / 15 page ![]() Item Category Temperature Range 40 to 105 C for 6.3 to 100VDC; 25 to 105 C for 160 to 450VDC Characteristics KMH Specifications - Snap Mount Rated Voltage Range 6.3 to 450VDC Capacitance Range 47 to 220,000 F Capacitance Tolerance 20% ( M ) at 20 C, 120Hz Leakage Current I 0.02CV ( A ) or 3mA, whichever is smaller, after 5 minutes at 20 C. Where I = Max. leakage current ( A ), C = Nominal capacitance ( F ) and V = Rated voltage ( V ) Dissipation Factor ( Tan )At 20 C, 120Hz *0.15 maximum for 35mm and 40mm diameter or 20mm in length. † For rated voltages ≤ 63V, values are not valid for case sizes >35mm in diameter or >50mm in length. Rated Voltage ( V ) Tan ( DF ) Max.† 6.3 0.60 10 0.50 16 0.40 25 0.30 35 0.25 50 0.20 63 -100 0.15 160 - 250 *0.10* 315 - 450 0.15 Low Temperature Characteristics At 120Hz, impedance ( Z ) ratio between the 25 C or 40 C value and 20 C value shall not exceed the values given below. Rated Voltage ( V ) Z( 25 C) / Z ( 20 C) Z( 40 C) / Z ( 20 C) 6.3 -16 4 15 25 3 10 35 3 8 50, 63 2 6 80, 100 2 5 160 - 400 4 — 450 8 — Rated Ripple Current Multipliers Ambient Temperature ( C) 45 C 2.64 60 C 2.23 70 C 2.12 85 C 1.73 105 C 1.00 Frequency (Hz ) DC Rated Voltage 6.3 -50V 63 -100V 160 - 250V 315-450V 50Hz 0.95 0.92 0.81 0.77 120Hz 1.00 1.00 1.00 1.00 300Hz 1.03 1.07 1.17 1.16 1kHz 1.05 1.13 1.32 1.30 10kHz 1.08 1.19 1.45 1.41 100kHz 1.08 1.20 1.50 1.43 Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them for 1,000 hours at 105 C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: ≤ 20% of initial measured value Tan (DF) : ≤ 150% of initial specified value Leakage current : ≤ initial specified value Endurance (Load Life) The following specifications shall be satisfied when the capacitors are restored to 20 C after subjecting them to DC voltage for 2,000 hours at 105 C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: ≤ 20% of initial measured value Tan (DF) : ≤ 200% of initial specified value Leakage current : ≤ initial specified value United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 34 KMH Series |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |