| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMS320F28027DAS bảng dữ liệu(PDF) 39 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMS320F28027DAS bảng dữ liệu(HTML) 39 Page - Texas Instruments |
|
39 / 138 page ![]() 39 TMS320F28027, TMS320F28026, TMS320F28023, TMS320F28022 TMS320F28021, TMS320F28020, TMS320F280200 www.ti.com SPRS523K – NOVEMBER 2008 – REVISED JUNE 2016 Submit Documentation Feedback Product Folder Links: TMS320F28027 TMS320F28026 TMS320F28023 TMS320F28022 TMS320F28021 TMS320F28020 TMS320F280200 Detailed Description Copyright © 2008–2016, Texas Instruments Incorporated 6.1.8 Boot ROM The Boot ROM is factory-programmed with boot-loading software. Boot-mode signals are provided to tell the bootloader software what boot mode to use on power up. The user can select to boot normally or to download new software from an external connection or to select boot software that is programmed in the internal Flash/ROM. The Boot ROM also contains standard tables, such as SIN/COS waveforms, for use in math-related algorithms. Table 6-1. Boot Mode Selection MODE GPIO37/TDO GPIO34/COMP2OUT TRST MODE 3 1 1 0 GetMode 2 1 0 0 Wait (see Section 6.1.9 for description) 1 0 1 0 SCI 0 0 0 0 Parallel IO EMU x x 1 Emulation Boot 6.1.8.1 Emulation Boot When the emulator is connected, the GPIO37/TDO pin cannot be used for boot mode selection. In this case, the boot ROM detects that an emulator is connected and uses the contents of two reserved SARAM locations in the PIE vector table to determine the boot mode. If the content of either location is invalid, then the Wait boot option is used. All boot mode options can be accessed in emulation boot. 6.1.8.2 GetMode The default behavior of the GetMode option is to boot to flash. This behavior can be changed to another boot option by programming two locations in the OTP. If the content of either OTP location is invalid, then boot to flash is used. One of the following loaders can be specified: SCI, SPI, I2C, or OTP. 6.1.8.3 Peripheral Pins Used by the Bootloader Table 6-2 shows which GPIO pins are used by each peripheral bootloader. Refer to the GPIO mux table to see if these conflict with any of the peripherals you would like to use in your application. (1) GPIO pins 32 and 33 may not be available on your device package. On these devices, this bootload option is unavailable. Table 6-2. Peripheral Bootload Pins BOOTLOADER PERIPHERAL LOADER PINS SCI SCIRXDA (GPIO28) SCITXDA (GPIO29) Parallel Boot Data (GPIO[7:0]) 28x Control (GPIO16) Host Control (GPIO12) SPI SPISIMOA (GPIO16) SPISOMIA (GPIO17) SPICLKA (GPIO18) SPISTEA (GPIO19) I2C SDAA (GPIO32)(1) SCLA (GPIO33)(1) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |