| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC18F4331 bảng dữ liệu(PDF) 210 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4331 bảng dữ liệu(HTML) 210 Page - Microchip Technology |
|
210 / 396 page ![]() PIC18F2331/2431/4331/4431 DS39616B-page 208 Preliminary 2003 Microchip Technology Inc. REGISTER 17-8: FLTCONFIG: FAULT CONFIGURATION REGISTER R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 BRFEN FLTBS(1) FLTBMOD(1) FLTBEN(1) FLTCON FLTAS FLTAMOD FLTAEN bit 7 bit 0 bit 7 BRFEN: Breakpoint Fault Enable bit 1 = Enable fault condition on a breakpoint (i.e., only when HDMIN = 1) 0 = Disable fault condition bit 6 FLTBS: Fault B Status bit(1) 1 =FLTB is asserted; if FLTBMOD = 0, cleared by the user if FLTBMOD = 1, cleared automatically at beginning of the new period when FLTB is deasserted 0 = No Fault bit 5 FLTBMOD: Fault B Mode bit(1) 1 = Cycle-by-cycle mode: Pins are inactive for the remainder of the current PWM period, or until FLTB is deasserted. FLTBS is cleared automatically when FLTB is inactive (no fault present). 0 = Inactive mode: Pins are deactivated (catastrophic failure) until FLTB is deasserted and FLTBS is cleared by the user only. bit 4 FLTBEN: Fault B Enable bit(1) 1 = Enable Fault B 0 = Disable Fault B bit 3 FLTCON: Fault Configuration bit 1 =FLTA , FLTB or both deactivates all PWM outputs 0 =FLTA or FLTB deactivates PWM[5:0] bit 2 FLTAS: Fault A Status bit 1 =FLTA is asserted; If FLTAMOD = 0, cleared by the user If FLTAMOD = 1, cleared automatically at beginning of the new period when FLTA is deasserted. 0 = No Fault bit 1 FLTAMOD: Fault A Mode bit 1 = Cycle-by-cycle mode: Pins are inactive for the remainder of the current PWM period, or until FLTA is deasserted. FLTAS is cleared automatically. 0 = Inactive mode: Pins are deactivated (catastrophic failure) until FLTA is deasserted and FLTAS is cleared by the user only. bit 0 FLTAEN: Fault A Enable bit 1 = Enable Fault A 0 = Disable Fault A Note 1: Unimplemented in PIC18F2X31 devices; maintain these bits clear. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = bit is set ‘0’ = bit is cleared x = bit is unknown |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |