| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC18F4331 bảng dữ liệu(PDF) 246 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4331 bảng dữ liệu(HTML) 246 Page - Microchip Technology |
|
246 / 396 page ![]() PIC18F2331/2431/4331/4431 DS39616B-page 244 Preliminary 2003 Microchip Technology Inc. REGISTER 20-1: ADCON0: A/D CONTROL REGISTER 0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 — — ACONV ACSCH ACMOD1 ACMOD0 GO/DONE ADON bit 7 bit 0 bit 7-6 Unimplemented: Read as ‘0’ bit 5 ACONV: Auto-Conversion Continuous Loop or Single-shot Mode Select bit 1 = Continuous Loop mode Enabled 0 = Single-shot mode Enabled bit 4 ACSCH: Auto-Conversion Single or Multi-Channel mode bit 1 = Multi-Channel mode Enabled, Single Channel mode Disabled 0 = Single Channel mode Enabled, Multi-Channel mode Disabled bit 3-2 ACMOD: Auto-Conversion mode Sequence Select bits If ACSCH = 1: 00 =Sequential Mode1 (SEQM1). Two samples are taken in sequence: 1st sample: Group A 2nd sample: Group B 01 =Sequential Mode2 (SEQM2). Four samples are taken in sequence: 1st sample: Group A 2nd sample: Group B 3rd sample: Group C 4th sample: Group D 10 =Simultaneous Mode1 (STNM1). Two samples are taken simultaneously: 1st sample: Group A and Group B 11 =Simultaneous Mode2 (STNM2). Two samples are taken simultaneously: 1st sample: Group A and Group B 2nd sample: Group C and Group D If ACSCH = 0, Auto-Conversion Single Channel Sequence mode enabled: 00 =Single Ch Mode1 (SCM1). Group A is taken and converted 01 =Single Ch Mode2 (SCM2). Group B is taken and converted 10 =Single Ch Mode3 (SCM3). Group C is taken and converted 11 =Single Ch Mode4 (SCM4). Group D is taken and converted Note: Group A, B, C, D refer to the ADCHS register. bit 1 GO/DONE: A/D Conversion Status bit 1 = A/D conversion cycle in progress. Setting this bit starts the A/D conversion cycle. If Auto- Conversion Single-shot mode is enabled (ACONV = 0), this bit is automatically cleared by hardware when the A/D conversion (single or multi-channel depending on ACMOD settings) has completed. If Auto-Conversion Continuous Loop mode is enabled (ACONV = 1), this bit remains set after the user/trigger has set it (continuous conversions). It may be cleared manually by the user to stop the conversions. 0 = A/D conversion or multiple conversions completed/not in progress bit 0 ADON: A/D On bit 1 = A/D converter module is enabled (after brief power-up delay, starts continuous sampling) 0 = A/D converter module is disabled Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at Reset ‘1’ = bit is set ‘0’ = bit is cleared x = bit is unknown |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |