LSM330 datasheet(70/75 Pages) STMICROELECTRONICS

tên linh kiện	LSM330

Giải thích chi tiết về linh kiện	Power-down and sleep modes

PDF	75 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

70 / 75 page

LSM330

70/75

DocID023426 Rev 3

8.78

INT1_DURATION_G (38h)

Angular rate sensor interrupt duration register (r/w).

D6 - D0 bits set the minimum duration of the interrupt event to be recognized. Duration

steps and maximum values depend on the ODR chosen.

WAIT bit has the following meaning:

Wait = ’0’: the interrupt falls immediately if signal crosses the selected threshold

Wait = ’1’: if the signal crosses the selected threshold, the interrupt falls only after the

duration has counted the number of samples at the selected data rate, written into the

duration counter register.

Figure 22. Wait disabled

Table 141. INT1_DURATION_G register

WAIT

Table 142. INT1_DURATION_G description

WAIT

WAIT enable. Default value: 0 (0: disable; 1: enable)

D [6:0]

Duration value. Default value: 000 0000

• Wait bit = ‘0’

Interrupt disabled as soon as condition

is no longer valid (ex: Rate value below threshold)

Rate

(dps)

Rate

Threshold

t(n)

Interrupt

Counter

Duration

Value

“Wait”

Disabled

LSM330 bảng dữ liệu(PDF) 70 Page - STMicroelectronics