For further information contact your local STMicroelectronics sales office.

September 2012

Doc ID 023551 Rev 2

1/7

1

SPC563M64CAL144/176

SPC563M64CALxx microcontroller family calibration and emulation

system

Data brief

Features

■

Support for LQFP144 and LQFP176 MCU

production packages allowing calibration

systems to be built without requiring

modifications to the standard production

system housing

■

2MByte static RAM organized as 1024K words

by 16 bits

■

On-board latch providing a 16-bit de-

multiplexed bus interface from the

SPC563M64 16-bit multiplexed calibration

interface;

■

Support for Nexus-based debug tools even if

application PCB does not include Nexus

connector

■

Nexus functionality with 12 Message Data Out

(MDO) signals

■

Support for full-feature calibration tools via

availability of comprehensive set of device

signals available on the connectors.

■

ERNI 154819 connector optimized for

calibration

■

High speed CAN transceiver with signals

protection

■

Specifications:

–

Board Size 36 x 61.8 mm

–

Target connector compatible with

TQPACK144SD and TQPACK176SD

sockets

Description

The SPC563M64CALxx is a calibration and

emulation system supporting the

automotive microprocessors.

The Calibration Adapter is designed to substitute

the QFP device on an ECU version during engine

calibration.

The complete system consists of a

SPC563M64CAL144/176 board and a

POLYPOD-TQ144/176 Poly-Pod which plugs

directly into the motherboard.

The Calibration Adapter can also be used as

emulation board as the Nexus trace port on

CSP496 allows using the pins for application

purpose.

www.st.com