M24SR-DISCOVERY datasheet(2/4 Pages) STMICROELECTRONICS

2 / 4 page

M24SR-DISCOVERY

2/4

DocID025659 Rev 3

Description

The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of

the M24SR series and is based on the M24SR64 device. Two versions of this kit are

available: the Standard Edition and the Premium Edition.

The Premium Edition includes all of the Standard edition features, plus a headset and a

Bluetooth module to demonstrate the convenience to pair it with a smartphone via NFC.

The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a

64 Kbits EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz

RFID reader or an NFC phone.

The I2C interface uses a two-wire serial interface, consisting of a bidirectional data line and

a clock line. It behaves as a slave with respect to the I2C protocol.

The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag.

The board is powered through the USB bus. It also includes a microcontroller STM32F103

to drive the EEPROM via I2C and the LCD screen via SPI bus.

The M24SR-DISCOVERY (MB1138) schematics, BOM, gerber files, drivers and firmware

can be downloaded from www.st.com.

Figure 3. Block diagram

1. Available only on premium edition.

M24SR-DISCOVERY bảng dữ liệu(PDF) 2 Page - STMicroelectronics