DA14580_16 datasheet(39/155 Pages) DIALOG

39 / 155 page

Datasheet

Revision 3.4

09-Nov-2016

CFR0011-120-01

39 of 155

DA14580

Bluetooth Low Energy 4.2 SoC

FINAL

R/W

EDSSI_DLH3

Interrupt Enable Register: EDSSI, Enable Modem Status

Interrupt. This is used to enable/disable the generation of

Modem Status Interrupt. This is the fourth highest priority

interrupt. 0 = disabled 1 = enabled Divisor Latch (High):

Bit[3] of the 8 bit DLH register

0x0

R/W

ELSI_DHL2

Interrupt Enable Register: ELSI, Enable Receiver Line Sta-

tus Interrupt. This is used to enable/disable the generation of

Receiver Line Status Interrupt. This is the highest priority

interrupt. 0 = disabled 1 = enabled Divisor Latch (High):

Bit[2] of the 8 bit DLH register.

0x0

R/W

ETBEI_DLH1

Interrupt Enable Register: ETBEI, Enable Transmit Holding

generation of Transmitter Holding Register Empty Interrupt.

This is the third highest priority interrupt. 0 = disabled 1 =

enabled Divisor Latch (High): Bit[1] of the 8 bit DLH register.

0x0

R/W

ERBFI_DLH0

Interrupt Enable Register: ERBFI, Enable Received Data

Available Interrupt. This is used to enable/disable the gener-

ation of Received Data Available Interrupt and the Character

Timeout Interrupt (if in FIFO mode and FIFO's enabled).

These are the second highest priority interrupts. 0 = disabled

1 = enabled Divisor Latch (High): Bit[0] of the 8 bit DLH reg-

ister.

0x0

Table 48: UART_IER_DLH_REG (0x50001004)

Bit

Mode

Symbol

Description

Reset

DA14580 bảng dữ liệu(PDF) 39 Page - Dialog Semiconductor

DA14580 bảng dữ liệu(HTML) 39 Page - Dialog Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL