SPE-17-8-015/A/WY

Page 2 of 8

1.Introduction

The Taoglas CC.001 C-Clip connector is designed to be SMT mounted on a PCB as a

contact bridge to antenna pads. This allows the PCB or Flex PCB antenna to be

connected to the system via the C-Clip, eliminating the need for cables and coaxial

RF connectors. The spring contact provides for a positive electrical connection.

Working height of the CC.001 is 1.0mm. The recommended footprint dimension is

3.2*1.7mm.

2.Specification

MECHANICAL

Dimension

3.41*1.5*1.44mm

Material

SUS 301 EH

Finished

100% Au plated over Ni

Working Height

1mm

ENVIROMENTAL

Salt Spray [ISO 9227:2012]

48 hours

Storage Temperature

-40°C to 120°C

Operating Temperature

-20°C to 70°C