MAT.500.B datasheet(2/35 Pages) TAOGLAS

2 / 35 page

SPE-17-8-002/A

Page 2 of 35

1. Introduction

The MAT.500.B embedded antenna board combines LTE MIMO antennas, Wi-Fi MIMO

antennas, plus GPS/GLONASS antenna. It can be used as a reference design or actual

embedded antenna for telematics applications such as fleet management, asset

tracking, and security/surveillance.

The board comes with five IPEX connectors and 1.37mm coax cables for LTE, Wi-Fi,

and GPS/GLONASS antennas.

Typical applications:

- Automotive and Heavy Equipment Vehicle Tracking and Telematics

- Remote Asset and Pipeline Monitoring

- HD Video over LTE

- First Responder and Emergency Services

- Global Data Communications/IoT

LTE 4G applications demand high speed data uplink and downlink. High efficiency and

high gain MIMO antennas are necessary to achieve the required signal to noise ratio

and throughput required to solve these challenges. Taoglas also takes care to have

high isolation between the two MIMO antennas to prevent self-interference. Low loss

cables are used to keep efficiency high over long cable lengths.

The GPS-GLONASS passive antenna receives efficiently on all two bands, leading to

higher location accuracy and stability of tracking in urban environments.

The unique omnidirectional Wi-Fi antennas provide high efficiency and high isolation

between antenna elements in a heavy-duty low profile compact structure, delivering

powerful MIMO antenna technology for Wi-Fi 802.11n and emerging 802.11ac.

Cable length and connector types are customizable. Contact your regional Taoglas

sales office for support.

MAT.500.B bảng dữ liệu(PDF) 2 Page - Taoglas antenna solutions