MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.

6

Typical Test Circuit

Maximum Wave Soldering Conditions:

Typical solder conditions for through hole crystals and oscillators:

Per MIL-STD-202, Method 210 “Resistance to Soldering Heat”, Condition C

Wave solder with a solder bath temperature of 260°C ±5°C and an exposure time of 10 ±1 second. Preheat

1-4°C/s to within 100°C of solder temperature (25 ±6 mm/s).

Note: Exceeding these limits may damage the device.

M6049/M6050 Series

14 Pin Dip, 3.3 & 5.0 Volt, HCMOS, Clipped Sinewave

Precision TCXO/TCVCXO