SLJ datasheet(2/2 Pages) LSTD

2 / 2 page

Eccosorb® SLJ

RFP-DS-SLJ 112515

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird

Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any

kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird

Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license

under any Laird Technologies or any third party intellectual property rights.

INSTRUCTIONS FOR USE

• The design of SLJ requires that its back surface is in intimate contact with a conductive surface.

• If this is not the case, one must first bond a conductive layer, such as aluminum foil, to the

surface of the substrate or the back surface of the absorber.

• To obtain a strong bond of the absorber to the object, the metallic surface should first be

thoroughly cleaned with a degreasing solvent.

• Bonding can be done with a suitable adhesive for nitrile rubber such as acrylic based adhesives.

Typical reflectivity of

ECCOSORB SLJ

-40

-35

-30

-25

-20

-15

-10

-5

Frequency in GHz

ECCOSORB SLJ

SLJ bảng dữ liệu(PDF) 2 Page - Laird Tech Smart Technology

SLJ bảng dữ liệu(HTML) 2 Page - Laird Tech Smart Technology

Html Pages

1 2

bảng dữ liệu tải về

Link URL