MCS datasheet(2/2 Pages) LSTD

2 / 2 page

Eccosorb® MCS

RFP-DS-MCS 093015

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird

Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any

kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird

Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license

under any Laird Technologies or any third party intellectual property rights.

INSTRUCTIONS FOR USE

• Eccosorb MCS is designed to function directly in front of a metallic surface.

• The material can be bonded by use of an RTV silicone based adhesive in conjunction with a

suitable primer.

• To obtain a strong bond of the absorber to the object, the metallic surface should first be

thoroughly cleaned with a degreasing solvent.

• Eccosorb MCS can be readily cut with a sharp knife and template.

It is a very flexible material and conforms to contoured surfaces.

Typical Attenuation Eccosorb MCS

MCS bảng dữ liệu(PDF) 2 Page - Laird Tech Smart Technology

MCS bảng dữ liệu(HTML) 2 Page - Laird Tech Smart Technology

Html Pages

1 2

bảng dữ liệu tải về

Link URL