Issue: 1649

In the effort to improve our products, we reserve the right to make changes judged to be necessary.

CONFIDENTIAL AND PROPRIETARY INFORMATION

This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.

Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or

use without specific written authorization of Pulse is strictly forbidden.

Description: DAS, Ultra Thin, Low Clearance

Antenna

PART NUMBER: DASUTLC500NF

Series: Clarity

13

INSTALLATION INSTRUCTION

Drill or cut a hole 2.5-2.75 inches (64-70 mm) diameter at the

center of the ceiling tile or at the desired location. Slide the antenna

cable/connector assembly through the hole. Slide the Collar and Nut

onto the cable. Turn the Nut, tightening the antenna against the ceiling

tile. See Figure 1 and Figure 2