PISA11

PISA11-Series

Weight

120g / 0.26lb

DIN-Rail

Use 35mm DIN-rail according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.

The DIN-rail height must be added to the unit depth to calculate the total required

installation depth.

Installation clearances

See chapter 3

Fig. 25-1 Front view

Fig. 25-2 Side view

(bulk-package with 25 pcs.)

DIN-Rail bracket for wall or panel mount:

Note: The picture is for representation only.

Hole diameter: 4.2mm

May 2014 / Rev. 1.7 DS-PISA11 - data sheet -

All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278-0

Germany

21/23