ML60.121

MiniLine-2

DIN-Rail bracket for wall or panel mount:

The picture of the power supply is for representation only

Hole diameter: 4.2mm

The MLY10.241 is a dual redundancy module, which has two diodes with a common cathode included. It can be used

for various purposes. The most popular application is to configure highly reliable

and true redundant power supply systems. Another interesting application is the

separation of sensitive loads from non-sensitive loads. This avoids the distortion

of the power quality for the sensitive loads which can cause controller failures.

Nov. 2015 / Rev. 1.4 DS--ML60.121-EN

All parameters are specified at 12V, 4.5A, 230Vac 50Hz input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

17/23