| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MB91F467DA bảng dữ liệu(PDF) 38 Page - Cypress Semiconductor |
|
|
|||||||||||||||||||||||||||||
MB91F467DA bảng dữ liệu(HTML) 38 Page - Cypress Semiconductor |
|
38 / 137 page ![]() Document Number: 002-04613 Rev. *A Page 38 of 137 MB91460D Series 9.5 Poweron Sequence in parallel programming mode The flash memory can be accessed in programming mode after a certain wait time, which is needed for Security Vector fetch: • Minimum wait time after VDD5/VDD5R power on: 2.76 ms • Minimum wait time after INITX rising: 1.0 ms 9.6 Flash Security 9.6.1 Vector addresses Two Flash Security Vectors (FSV1, FSV2) are located parallel to the Boot Security Vectors (BSV1, BSV2) controlling the protection functions of the Flash Security Module: FSV1: 0x14:8000 BSV1: 0x14:8004 FSV2: 0x14:8008 BSV2: 0x14:800C 9.6.2 Security Vector FSV1 The setting of the Flash Security Vector FSV1 is responsible for the read and write protection modes and the individual write protection of the 8 Kbytes sectors. FSV1 (bit31 to bit16) The setting of the Flash Security Vector FSV1 bits [31:16] is responsible for the read and write protection modes. Explanation of the bits in the Flash Security Vector FSV1 [31:16] FSV1[31:19] FSV1[18] Write Protection Level FSV1[17] Write Protection FSV1[16] Read Protection Flash Security Mode set all to “0” set to “0” set to “0” set to “1” Read Protection (all device modes, except INTVEC mode MD[2:0] = “000”) set all to “0” set to “0” set to “1” set to “0” Write Protection (all device modes, without exception) set all to “0” set to “0” set to “1” set to “1” Read Protection (all device modes, except INTVEC mode MD[2:0] = “000”) and Write Protection (all device modes) set all to “0” set to “1” set to “0” set to “1” Read Protection (all device modes, except INTVEC mode MD[2:0] = “000”) set all to “0” set to “1” set to “1” set to “0” Write Protection (all device modes, except INTVEC mode MD[2:0] = “000”) set all to “0” set to “1” set to “1” set to “1” Read Protection (all device modes, except INTVEC mode MD[2:0] = “000”) and Write Protection (all device modes except INTVEC mode MD[2:0] = “000”) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |