© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

C1003_C0G • 4/30/2014

9

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10 – 200 VDC (Commercial Grade)

Soldering Process

Recommended Soldering Technique:

•SolderwaveorsolderreflowforEIAcasesizes0603,0805and1206

•AllotherEIAcasesizesarelimitedtosolderreflowonly

Recommended Reflow Soldering Profile:

KEMET’s families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection,

IRorvaporphasereflowtechniques.Preheatingofthesecomponentsisrecommendedtoavoidextremethermalstress.KEMET’s

recommendedprofileconditionsforconvectionandIRreflowreflecttheprofileconditionsoftheIPC/J-STD-020standardformoisture

sensitivitytesting.Thesedevicescansafelywithstandamaximumofthreereflowpassesattheseconditions.

Profile Feature

Termination Finish

SnPb

100% Matte Sn

Preheat/Soak

100°C

150°C

150°C

200°C

60 – 120 seconds

60 – 120 seconds

3°C/second maximum 3°C/second maximum

183°C

217°C

60 – 150 seconds

60 – 150 seconds

235°C

260°C

Time Within 5°C of Maximum

20 seconds maximum 30 seconds maximum

Time 25°C to Peak

Temperature

6 minutes maximum

8 minutes maximum

Note 1: All temperatures refer to the center of the package, measured on the

capacitor body surface that is facing up during assembly reflow.

Time

25° C to Peak

25

Maximum Ramp Up Rate = 3°C/sec

Maximum Ramp Down Rate = 6°C/sec