LMX9820 datasheet(26/40 Pages) NSC

26 / 40 page

www.national.com

12.0 Command Interface (Continued)

Table 33. Bluetooth Low Power Modes

Command

Event

Description

Set Default Link Policy

Set Default Link Policy Confirm

Defines the link policy used for any incoming

or outgoing link.

Get Default Link Policy

Get Default Link Policy Confirm

Returns the stored default link policy

Set Link Policy

Set Link Policy Confirm

Defines the modes allowed for a specific link

Get Link Policy

Get Link Policy Confirm

Returns the actual link policy for the link

Enter Sniff Mode

Enter Sniff Mode Confirm

Exit Sniff Mode

Exit Sniff Mode Confirm

Enter Park Mode

Enter Park Mode Confirm

Enter Hold Mode

Enter Hold Mode Confirm

Power Save Mode Changed

Remote device changed power save mode

on the link

Table 34. Wake Up Functionality

Command

Event

Description

Disable Transport Layer

Transport Layer Enabled

Disabling the UART Transport Layer and

activates the Hardware Wakeup function

Table 35. SPP Port Configuration and Status

Command

Event

Description

Set Port Config

Set Port Config Confirm

Set port setting for the “virtual” serial port link

over the air

Get Port Config

Get Port Config Confirm

Read the actual port settings for a “virtual”

serial port

Port Config Changed

Notification if port settings were changed

from remote device

SPP Get Port Status

SPP Get Port Status Confirm

Returns status of DTR, RTS (for the active

RFComm link)

SPP Port Set DTR

SPP Port Set DTR Confirm

Sets the DTR bit on the specified link

SPP Port Set RTS

SPP Port Set RTS Confirm

Sets the RTS bit on the specified link

SPP Port BREAK

Indicates that the host has detected a break

SPP Port Overrun Error

SPP Port Overrun Error Confirm

Used to indicate that the host has detected an

overrun error

SPP Port Parity Error

SPP Port Parity Error Confirm

Host has detected a parity error

SPP Port Framing Error

SPP Port Framing Error Confirm

Host has detected a framing error

SPP Port Status Changed

Indicates that remote device has changed

one of the port status bits

Table 36. Local Bluetooth Settings

Command

Event

Description

Read Local Name

Read Local Name Confirm

Read actual friendly name of the device

LMX9820 bảng dữ liệu(PDF) 26 Page - National Semiconductor (TI)

LMX9820 bảng dữ liệu(HTML) 26 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

bảng dữ liệu tải về

Link URL