| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MJE13007 bảng dữ liệu(PDF) 4 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
MJE13007 bảng dữ liệu(HTML) 4 Page - ON Semiconductor |
|
4 / 10 page ![]() MJE13007 www.onsemi.com 4 0.01 0.02 0.05 0.1 0.2 0.5 1 SINGLE PULSE There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC −VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 6 is based on TC = 25 °C; TJ(pk) is variable depending on power level. Second breakdown pulse limits are valid for duty cycles to 10% but must be derated when TC ≥ 25°C. Second breakdown limitations do not derate the same as thermal limitations. Allowable current at the voltages shown on Figure 6 may be found at any case temperature by using the appropriate curve on Figure 8. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. Use of reverse biased safe operating area data (Figure 7) is discussed in the applications information section. 1000 10 20 30 70 100 200 50 300 500 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 6. Maximum Forward Bias Safe Operating Area 0 100 200 300 400 500 600 700 800 VCEV, COLLECTOR-EMITTER CLAMP VOLTAGE (VOLTS) Figure 7. Maximum Reverse Bias Switching Safe Operating Area 20 40 60 80 100 120 140 160 TC, CASE TEMPERATURE (°C) Figure 8. Forward Bias Power Derating 2 5 10 20 50 100 200 500 10k t, TIME (msec) Figure 9. Typical Thermal Response for MJE13007 20 10 5 1 0.5 0.02 0.05 0.2 0.1 2 100 50 0.01 10 8 6 4 2 0 1 0.8 0.6 0.4 0.2 0 1 0.01 0.02 0.05 0.1 0.2 0.5 0.07 0.7 Extended SOA @ 1 ms, 10 ms 10 ms 1 ms 1 ms 5 ms DC TC = 25°C BONDING WIRE LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT CURVES APPLY BELOW RATED VCEO TC ≤ 100°C GAIN ≥ 4 LC = 500 mH VBE(off) -5 V -2 V 0 V SECOND BREAKDOWN DERATING THERMAL DERATING DUTY CYCLE, D = t1/t2 t1 P(pk) t2 RqJC(t) = r(t) RqJC RqJC = 1.56°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RqJC(t) D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |