công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

HMC5805ALS6 bảng dữ liệu(PDF) 8 Page - Analog Devices

tên linh kiện HMC5805ALS6
Giải thích chi tiết về linh kiện  High P1dB Output Power: 24.5 dBm
PDF  10 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  AD [Analog Devices]
Trang chủ  http://www.analog.com
Logo AD - Analog Devices

HMC5805ALS6 bảng dữ liệu(HTML) 8 Page - Analog Devices

Back Button HMC5805ALS6 Datasheet HTML 2Page - Analog Devices HMC5805ALS6 Datasheet HTML 3Page - Analog Devices HMC5805ALS6 Datasheet HTML 4Page - Analog Devices HMC5805ALS6 Datasheet HTML 5Page - Analog Devices HMC5805ALS6 Datasheet HTML 6Page - Analog Devices HMC5805ALS6 Datasheet HTML 7Page - Analog Devices HMC5805ALS6 Datasheet HTML 8Page - Analog Devices HMC5805ALS6 Datasheet HTML 9Page - Analog Devices HMC5805ALS6 Datasheet HTML 10Page - Analog Devices  
Zoom Inzoom in Zoom Outzoom out
 8 / 10 page
background image
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
8
HMC5805ALS6
v01.1216
GaAs pHEMT MMIC 0.25 WATT POWER AMPLIFIER
DC - 40 GHz
NOTE 1: Drain Bias (Vdd) must be applied through a broadband bias tee
with low series resistance and capable of providing 250 mA
Application Information
Application Circuit
BIASING PROCEDURES:
DC bias must be applied to the drain via an RF choke/inductor connection to the RFOUT/VDD pin. Gate bias must be applied to
VGG1 and VGG2. Capacitive bypassing is recommended for all of the DC bias pins and AC terminations to ground are recom-
mended for ACG1-ACG4, as shown in the Application Circuit.
The recommended bias sequence during power-up is as follows:
1. Set VGG1 to −2.0 V to pinch off the channels of the lower FETs.
2. Set VDD to 10.0 V. Because the lower FETs are pinched off, IDQ remains very low upon application of VDD.
3. Set VGG2 to 3.5 V.
3. Adjust VGG1 to be more positive until a quiescent drain current of 175 mA has been obtained.
4. Apply the RF input signal.
The recommended bias sequence during power-down is as follows:
1. Turn off the RF input signal.
2. Set VGG1 to −2.0 V to pinch off the channels of the lower FETs.
3. Set VGG2 to 0 V.
4. Set VDD to 0 V.
5. Set VGG1 to 0 V.
Power-up and power-down sequences may differ from the ones described, though care must always be taken to
ensure adherence to the values shown in the Absolute Maximum Ratings.
Unless otherwise noted, all measurements and data shown were taken using the typical application circuit as config-
ured on our evaluation board. The bias conditions shown in the specifications section are the operating points recom-
mended to optimize the overall performance. Operation using other bias conditions may provide performance that
differs from what is shown in this data sheet.



Html Pages

1 2 3 4 5 6 7 8 9 10


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com