| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AD6684 bảng dữ liệu(PDF) 82 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD6684 bảng dữ liệu(HTML) 82 Page - Analog Devices |
|
82 / 107 page ![]() AD6684 Data Sheet Rev. 0 | Page 82 of 107 MEMORY MAP DETAILS All address locations that are not included in Table 46 are not currently supported for this device and must not be written. Table 46. Memory Map Details Address Name Bits Bit Name Settings Description Reset Access 0x0000 Global Map SPI Config- uration A 7 Soft reset (self clearing) When a soft reset is issued, the user must wait 5 ms before writing to any other register. This wait provides sufficient time for the boot loader to complete. 0x0 R/W 0 Do nothing. 1 Reset the SPI and registers (self clearing). 6 LSB first mirror 0x0 R/W 1 LSB shifted first for all SPI operations. 0 MSB shifted first for all SPI operations. 5 Address ascension mirror 0x0 R/W 0 Multibyte SPI operations cause addresses to auto-increment. 1 Multibyte SPI operations cause addresses to auto-increment. [4:3] Reserved Reserved. 0x0 R 2 Address ascension 0x0 R/W 0 Multibyte SPI operations cause addresses to autoincrement. 1 Multibyte SPI operations cause addresses to auto increment. 1 LSB first 0x0 R/W 1 LSB shifted first for all SPI operations. 0 MSB shifted first for all SPI operations. 0 Soft reset (self clearing) When a soft reset is issued, the user must wait 5 ms before writing to any other register. This wait provides sufficient time for the boot loader to complete. 0x0 R/W 0 Do nothing. 1 Reset the SPI and registers (self clearing). 0x0001 Global Map SPI Config- uration B 7 Single instruction 0x0 R/W 0 SPI streaming enabled. 1 Streaming (multibyte read/write) is disabled. Only one read or write operation is performed, regardless of the state of the CSB line. [6:2] Reserved Reserved. 0x0 R 1 Datapath soft reset (self clearing) 0x0 R/W 0 Normal operation. 1 Datapath soft reset (self-clearing). 0 Reserved Reserved. 0x0 R 0x0002 Channel map chip config- uration [7:2] Reserved Reserved. 0x0 R [1:0] Channel power modes Channel power modes. 0x0 R/W 00 Normal mode (power up). 10 Standby mode. The digital datapath clocks are disabled, the JESD204B interface is enabled, and the outputs are enabled. 11 Power-down mode. The digital datapath clocks are disabled, the digital datapath is held in reset, the JESD204B interface is disabled, and the outputs are disabled. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |