4719BH03

PAGE 7

WWW.XPPOWER.COM

* Notes:

1. At maximum rated output voltage.

2. Output voltage is load dependent. Under light or no load conditions, reduce input voltage so maximum rated output voltage is not exceeded.

3. Specifications after 30 minute warm up, full load, at 25C unless otherwise indicated.

4. For dual output units [CT option], the negative output voltage will be ~10% larger than the positive output voltage with respect to the center tap pin.

5. Ripple Specifications for dual output units applies to the voltage between the positive and negative output terminals.

6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output.

7. This unit has flying leads on the output and clearance holes for mounting.

XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product

changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details.

HOW TO ORDER

Rectifier &

Multiplier

Transformer

Oscillator

(+) Output

Center tap (for Dual output option)

(-) Output

(+) In

(-) In

Model

Output Voltage (See table)

EXAMPLE:

E10CTAB (E-Model, 10-Output Voltage, CT-Center Tap, AB-Shielding & Mounting Enclosure)

PART NUMBER SELECTOR:

Model Number:

E10CTAB

Shielding & Mounting Enclosure (Optional)

Center Tap (for dual output option)

E SERIES

BLOCK DIAGRAM

OPTION CODE TABLE

OPTION

ORDER CODE

MODELS

POLARITY

Positive / Negative reversible

Blank

ALL

Dual Output (center tap) option

CT

ALL

OPTIONS

Shielding and Mounting Enclosure

AB

ALL