1

65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply

DF60 Series

2017.1

e

■Features

1. High current capacity

Capable of going to a max. of 65A when using

8 AWG with the single position connector.

(Please refer to the chart for the rated current in

other pin counts.)

2. Secure lock mechanism ensures

complete mating

A secure lock mechanism with a clear tactile and

audible click prevents insufficient mating. (Fig.2)

3. Highly reliable 5-point contact structure

Three independent contact springs provide a

secure contact with high contact reliability using

5-point of contact. (Fig.3)

4. Molded lance design

The lance is actually part of the housing instead of

being part of the terminal. This prevents tangled

wires during assembly.

5. Mis-insertion prevention for headers

The addition of a molded pin on the header allows

temporar y mounting retention and prevents

reverse mounting on the PCB. (Fig.1).

(Right angle pin header has a metal fitting for this

purpose)

6. Prevention of solder cracks

Glass-reinforced resin is used on pin header to

prevent solder cracks due to thermal contraction.

7. Design Prevents short-circuits between

contacts

The wall structure between contacts isolates the

contacts and prevents short circuits from occuring.

(Fig.1)

8. Compliant to UL, C-UL and TÜV specifications

9. Glow Wire compliance(Compliant with IEC

60695-2-11)

［

］

● Lock structure

Fig.1

Fig.2

(UL, C-UL, TÜV certified product)

Three independent spring contacts provide a secure contact and a

high contact reliability with 5-points of contact.

Fig.3