B182

DF1 Series

Part Number

CL No.

Height

Width

Depth

Weight

DF1 Connection Press HP513

550-0134-4

200mm 260mm 250mm

3.7kg

Protector Type

Applicable Jacket Diameter

Recommended Cable

DF1-*A1.33

Ø1.35 to Ø1.45

UL1007 AWG24

DF1-*A1.05

Ø1.1 to Ø1.35

UL1007 AWG26, 28

Part Number

CL No.

DF1 Cable Crimper

550-0130-3

BDF1 Connection Press

BDF1 Cable Crimper

BPrecautions

1. Recommended Soldering Condition

Flow: 250ç for 10 seconds

Manual soldering: 300ç for 3 seconds

2. Cleaning Condition

Refer to Nylon Connector Use Hand book.

3. Connection Condition

[Crimping]

Refer to Nylon Connector Use Hand book.

[ID]

●For the insulation displacement tool, set a set of connector per insulation displacement. If more

than 2 connectors have been set, they interrupt each other, which will cause an insulation

displacement failure.

●After the insulation displacement, make sure that the locks on both protector sides are

completely activated.

4. Precation

Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

5. Precation

Refer to Nylon Connector Use Hand book.

Note:The intermediate connection can be established by removing the

cable cuttingblade of this press machine.

* indicates contact No.

Used to install the cable in the protector.

DF1 Connection Press HP513

DF1 Cable Crimper

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.