MCP6V71 datasheet(3/46 Pages) MICROCHIP

3 / 46 page

 2015 Microchip Technology Inc.

DS20005385B-page 3

MCP6V71/1U/2/4

1.0

ELECTRICAL

CHARACTERISTICS

1.1

Absolute Maximum Ratings †

VDD –VSS .................................................................................................................................................................6.5V

Current at Input Pins ..............................................................................................................................................±2 mA

Analog Inputs (VIN+ and VIN-) (Note 1) ......................................................................................VSS – 1.0V to VDD+1.0V

All Other Inputs and Outputs ......................................................................................................VSS – 0.3V to VDD+0.3V

Difference Input Voltage .................................................................................................................................|VDD –VSS|

Output Short Circuit Current ........................................................................................................................... Continuous

Current at Output and Supply Pins ......................................................................................................................±30 mA

Storage Temperature .............................................................................................................................-65°C to +150°C

Maximum Junction Temperature .......................................................................................................................... +150°C

ESD protection on all pins (HBM, CDM, MM)

MCP6V71/1U

  4kV, 1.5kV, 400V

MCP6V72/4

  4kV, 1.5kV, 300V

Note 1:

See Section 4.2.1, Rail-to-Rail Inputs.

1.2

Specifications

†Notice:

Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only, and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

TABLE 1-1:

DC ELECTRICAL SPECIFICATIONS

Electrical Characteristics:

Unless otherwise indicated, TA = +25°C, VDD = +2V to +5.5V, VSS = GND,

VCM = VDD/3,VOUT =VDD/2, VL =VDD/2, RL = 20 kΩ to VL and CL = 30 pF (refer to Figures 1-4 and 1-5).

Parameters

Sym.

Min.

Typ.

Max.

Units

Conditions

Input Offset

Input Offset Voltage

VOS

-8

—

µV

TA = +25°C

Input Offset Voltage Drift with

Temperature (Linear Temp. Co.)

TC1

-30

—

+30

nV/°C TA = -40 to +125°C,

VDD = 2V (Note 1)

-15

—

+15

TA = -40 to +125°C,

VDD = 5.5V (Note 1)

Input Offset Voltage Quadratic

Temp. Co.

TC2

—-30

—

pV/°C2 TA = -40 to +125°C,

VDD = 2V

—-6

—

TA = -40 to +125°C,

VDD = 5.5V (Note 1)

Input Offset Voltage Aging

∆VOS

—

±0.75

—

µV

408 hours Life Test at

+150°,

measured at +25°C

Power Supply Rejection Ratio

PSRR

115

125

—

Note 1:

For Design Guidance only; not tested.

Figure 2-19 shows how VCML and VCMH changed across temperature for the first production lot.

Parts with date codes prior to September 2015 (week code 27) were screened to a +3 nA maximum limit.

Parts with date codes prior to September 2015 (week code 27) were screened to ±1 nA minimum/maxi-

mum limits.

MCP6V71 bảng dữ liệu(PDF) 3 Page - Microchip Technology

MCP6V71 bảng dữ liệu(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

bảng dữ liệu tải về

Link URL