TC1232 datasheet(7/24 Pages) MICROCHIP

7 / 24 page

 2002-2014 Microchip Technology Inc.

DS20001370E-page 7

TC1232

4.0

OPERATIONAL DESCRIPTION

4.1

Power Monitor

The TC1232 provides the function of warning the

processor of a power failure. When VCC is detected as

being below the voltage levels defined by the TOL pin,

the TC1232’s comparator outputs the RST and RST

signals to a logic level that warns the system of an out-

of-tolerance power supply. The RST and RST signals

switch at a threshold value of 4.5V if TOL is tied to VCC,

and at a value of 4.75V if TOL is grounded. The RST

and RST signals are held active for a minimum of

250 ms to ensure that the power supply voltage has

been stabilized.

Figure 4-1 shows the VCC fall time.

Figure 4-2 shows the VCC rise time.

Figure 4-3 shows the time from when the voltage trip

point is detected to the Reset output pin going active.

Figure 4-4 shows the time from when the voltage trip

point is exited to the Reset output pin going inactive.

FIGURE 4-1:

Power-Down Slew Rate.

FIGURE 4-2:

Power-up Slew Rate.

FIGURE 4-3:

VCC Detect Reset Output

Delay (Power-Down).

FIGURE 4-4:

VCC Detect Reset Output

Delay (Power-Up).

+4.75V

VCC

+4.25V

VCC

+4.25V

+4.75V

VCC = 5V

+4.5V (5% Trip Point)

+4.25V (10% Trip Point)

RST

VOL

VOH

tRPD

VCC SLEW RATE = 1.66 mV/µs (0.5V/300 µs)

VCC

4.6V (5% Trip Point)

4.5V(10% Trip Point)

RST

VOL

VOH

tRPU

TC1232 bảng dữ liệu(PDF) 7 Page - Microchip Technology

TC1232 bảng dữ liệu(HTML) 7 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

bảng dữ liệu tải về

Link URL