LM3526 datasheet(9/11 Pages) NSC

tên linh kiện	LM3526

Giải thích chi tiết về linh kiện	Dual Port USB Power Switch and Over-Current Protection

PDF	11 Pages

Scroll/Zoom	100%

nhà sản xuất	NSC [National Semiconductor (TI)]

Trang chủ	http://www.national.com

Logo

9 / 11 page

Application Information (Continued)

PCB LAYOUT CONSIDERATIONS

In order to meet the USB requirements for voltage drop,

droop and EMI, each component used in this circuit must be

evaluated for its contribution to the circuit performance. The

PCB layout rules and guidelines must be followed.

•

Place the switch as close to the USB connector as pos-

sible. Keep all V

bus traces as short as possible and use at

least 50-mil, 1 ounce copper for all V

bus traces. Solder

plating the traces will reduce the trace resistance.

•

Avoid vias as much as possible. If vias are used, use mul-

tiple vias in parallel and/or make them as large as pos-

sible.

•

Place the output capacitor and ferrite beads as close to

the USB connector as possible.

•

If ferrite beads are used, use wires with minimum resis-

tance and large solder pads to minimize connection re-

sistance.

DS101097-23

FIGURE 2. Self-Powered Hub Per-Port Voltage Drop

LM3526 bảng dữ liệu(PDF) 9 Page - National Semiconductor (TI)