USB2517 datasheet(25/58 Pages) MICROCHIP

25 / 58 page

 2013-2016 Microchip Technology Inc.

DS00001598B-page 25

USB2517/USB2517I

7.2.1.9

COMPOUND

Compound Device: Allows the OEM to indicate that the Hub is part of a com-

pound (see the USB Specification for definition) device. The applicable

port(s) must also be defined as having a "Non-Removable Device".

Note:

When configured via strapping options, declaring a port as non-

removable automatically causes the hub controller to report that it

is part of a compound device.

0 = No

1 = Yes, Hub is part of a compound device

2:0

Reserved

Bit

Number

Bit Name

Description

7:4

Reserved

PRTMAP_EN

Port Re-mapping enable: Selects the method used by the hub to assign port

numbers and disable ports.

‘0’ = Standard Mode

‘1’ = Port Re-map mode

2:1

LED_MODE

LED Mode Selection: The LED_A[47:1]_N and LED_B[47:1]_N pins support

several different modes of operation.

‘00’ = USB Mode

‘01’ = Speed Indication Mode

‘10’ = Same as ‘00’, USB Mode

‘11’ = Same as ‘00’, USB Mode

Warning: Do not enable an LED mode that requires LED pins that are not

available in the specific package being used in the implementation!

Note:

The Hub will only report that it supports LED's to the host when

USB mode is selected. All other modes will be reported as No LED

Support.

STRING_EN

Enables String Descriptor Support

‘0’ = String Support Disabled

‘1’ = String Support Enabled

Bit

Number

Bit Name

Description

USB2517 bảng dữ liệu(PDF) 25 Page - Microchip Technology

USB2517 bảng dữ liệu(HTML) 25 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

bảng dữ liệu tải về

Link URL