TSB611

Application information

DocID028074 Rev 1

19/24

3.7

Initialization time

The TSB611 has a good power supply rejection ratio (PSRR), but as with all devices, it is

recommended to use a 22 nF bypass capacitor as close as possible to the power supply

pins. It prevents the noise present on the power supply impacting the signal conditioning. In

addition, this bypass capacitor enhances the initialization time (see Figure 36 and

Figure 37).

Figure 36: Startup behavior without bypass capacitor

Figure 37: Startup behavior with a 22 nF bypass

capacitor