MIC59P50YN datasheet(4/12 Pages) MICREL

4 / 12 page

Micrel, Inc.

MIC59P50

July 29, 2015

Revision 2.0

Absolute Maximum Ratings

(2)

Input Voltage (VCE) .......................................................+80V

Supply Voltage

(VDD).........................................................................15V

(VDD – VEE) ...............................................................25V

Continuous Collector Current (IC)..............................500mA

Protected Current

(4) .......................................................1.5A

Lead Temperature (soldering, 10s)............................ 260°C

Storage Temperature (Ts)......................... –65°C to +150°C

ESD Rating

(5)................................................. ESD Sensitive

Operating Ratings

(3)

Input Voltage (VIN).................................. –0.3V to VDD+0.3V

Operating Temperature (TA)........................ –40°C to +85°C

Junction Temperature (TJ) ....................................... +150°C

Power Dissipation (PD)

Plastic DIP (N) ....................................................... 2.4W

Derate above TA = +25°C ............................24mW/°C

PLCC (V) ............................................................... 1.6W

Derate above TA = +25°C ............................16mW/°C

Wide SOIC (WM)................................................... 1.4W

Derate above TA = +25°C ............................14mW/°C

Electrical Characteristics

(6)

VDD = 5V; TA = 25°C, unless noted.

Symbol

Parameter

Condition

Min.

Typ.

Max.

Units

ICEX

Output Leakage Current

VCE = 80V, TA = +25°C

µA

VCE = 80V, TA = +70°C

100

µA

VCE(SAT)

Collector-Emitter

IC = 100mA

0.9

1.1

Saturation Voltage

IC = 200mA

1.1

1.3

IC = 350mA

1.3

1.6

VIN(0)

Input Voltage

1.0

VIN(1)

VDD = 12V

10.5

VDD = 10V

8.5

VDD = 5V, Note 7

3.5

RIN

Input Resistance

VDD = 12V

200

Ω

VDD = 10V

300

Ω

VDD = 5V

600

Ω

IOL

/Flag Output Current

VOL = 0.4V

IOH

/Flag Output Leakage

VOH = 12V

Notes:

Exceeding the absolute maximum ratings may damage the device.

The device is not guaranteed to function outside its operating ratings.

Each channel VEE connection must be designed to minimize inductance and resistance.

Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5k

Ω in series with 100pF.

Specification for packaged product only.

Operation of these devices with standard TTL or DTL may require the use of appropriate pull-up resistors to ensure a minimum logic “1”.

MIC59P50YN bảng dữ liệu(PDF) 4 Page - Micrel Semiconductor

MIC59P50YN bảng dữ liệu(HTML) 4 Page - Micrel Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

bảng dữ liệu tải về

Link URL